• Hauppauge Wintv-hvr 950 Drivers License
• Hauppauge Wintv Hvr 1950 Driver
• Hauppauge Wintv-hvr 950 Drivers Windows 10
• Hauppauge Wintv-hvr 950 Drivers Update

The latest versions of WinTV v10, WinTV 8.5, WinTV v8 and Hauppauge Capture include these drivers. But if you are looking just for the Windows 10 driver, these are updated drivers which can be used with Windows 10. Yes, the WinTV-HVR-950 can be used in Windows XP MCE 2005, Vista Media Center or WIndows 7 Media Center. Simply download and install the latest MCE Kit from the Hauppauge website, which will install the driver and necessary 'Hauppauge MCE Soft Encoder'. Model 01139: WinTV-HVR-950 with ATSC and NTSC tuners, and portable antenna; model 01145: WinTV-HVR-950 for Mac's and PC's. For use in North America. Bundled with Elgato EyeTV Lite for Mac's and WinTV v6 for PC's; model 01176: WinTV-HVR-950 with ATSC and NTSC tuners plus French/Englsh manual and portable antenna.

Download Hauppauge WinTV HVR-900 Series Driver 5.7.0129.25085 (TV Tuner / Capture Card).

WinTV v10 application and Windows driver package

This download is a complete WinTV v10 application, including Windows drivers for supported WinTV products plus utilities.

Installation notes for WinTV v10:

A WinTV v10 Activation Code will be needed to install this WinTV v10 version. An Activation code for WinTV v8.5 or WinTV v8 cannot be used with WinTV v10.

If you do not have a WinTV v10 Activation Code, you can purchase a new WinTV v10 Activation Code on the Hauppauge webstore.

If you have purchased an Activation Code for WinTV v10 with Extend from the Hauppauge Webstore, the latest version of WinTV v10 with Extend will be installed.

Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it is the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v10

WinTV v10 installer
For Windows 10, 8, and 7 | Version: 39104 | File size: 148 MB | Date: April 13, 2021
Release notes | Backup download site | Previous version

WinTV v10 installation instructions

The WinTV v10 will install Windows drivers before installing the WinTV v10 application.

• Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC
• Step 2: Run wintv10setup from the Download folder on your PC. If you get a Windows message 'Windows protected your PC', click 'More info' and then 'Run anyway'. This is one of Microsoft's new 'features' to block new applications.
• Step 3: Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
• Step 4: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you or is printed on the WinTV v10 activation card. You do not need to enter the dashes, and you can use upper or lower case characters.
• Step 5: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.

WinTV-HVR hybrid analog/digital TV series

WinTV-HVR-935C, WinTV-HVR-930, WinTV-HVR-930C

WinTV-HVR-2200, WinTV-HVR-2205, WinTV-HVR-2255, WinTV-HVR-2250,

WinTV-HVR-5525, WinTV-HVR-4000, WinTV-HVR-3000

WinTV-HVR-1265, WinTV-HVR-1260, WinTV-HVR-1250

WinTV-HVR-1600, WinTV-HVR-1800

WinTV-HVR-1150, WinTV-HVR-1100

WinTV-HVR-955Q, Xbox One TV tuner, WinTV-HVR-950Q, WinTV-HVR-950, WinTV-HVR-850

WinTV digital TV receivers

WinTV-dualHD, WinTV-quadHD, WinTV-soloHD

Starburst 2, Starburst

WinTV-NOVA-T, WinTV-NOVA-T-USB (DVB-T)

WinTV-Aero (DVB-T)

WinTV-NOVA-T stick (DVB-T)

WinTV-MiniStick (DVB-T)

WinTV Diversity Stick, WinTV-NOVA-TD Stick

HD PVR series of high definition video recorders

HD PVR 2 (all models), Colossus 2, StreamEez-Pro, HD PVR model 1212, Colossus

Satellite TV receivers

WinTV-NOVA-S, WinTV-NOVA-S2, WinTV-NOVA

Starburst 2, Starburst

WinTV-HVR-5525

Hauppauge Wintv-hvr 950 Drivers License

Digital cable receivers

WinTV-DCR-2650, WinTV-DCR-3250

TV tuners with limited support

WinTV PVR-250: up to Windows 7, 32-bit only

WinTV PVR-350: up to Windows 7, 32-bit only

WinTV PVR-USB2 (29xxx model): up to Windows 7, 32-bit only

WinTV PVR-150: up to Windows 7, 32/64-bit, less than 4GB RAM

WinTV PVR-500: up to Windows 7, 32/64-bit, less than 4GB RAM

WinTV PVR-PVR-USB2 (24xxx model): up to Windows 7, 32/64-bit, less than 4GB RAM

PCTV Products

• PCTV 340e/801e
• PCTV 73e
• PCTV HD TV Tuner Card (800i)
• PCTV 290e
• PCTV 77e
• PCTV 79e
• PCTV 78e
• PCTV 291e
• PCTV 292e
• PCTV 461e
• PCTV Pico Stick 74e

Note

If you do not see your Hauppauge product listed, please email us at: techsupport@hauppauge.com and we will check compatibility.

How do I rescan channels?

Hauppauge Wintv Hvr 1950 Driver

Click on the setting button (Gear) in the lower left of the WinTV v10 application. Then click on the Devices tab and highlight your WinTV device and click Tuner Setup (see the first picture below).

In the Device Setup Wizard, you will see a list of TV formats which your Hauppauge TV tuner can support. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs (see the second picture below). You can also select all formats and let the WinTV application show you what it finds in each format (if anything).

Click Next and Next and let WinTV scan for channels. The results should look like picture 3 below.

Settings -> Devices -> Tuner Setup

click to enlarge

Hauppauge Wintv-hvr 950 Drivers Windows 10

Scan Complete

click to enlarge

My PC is not waking up for recordings. How can I fix this?

Can I get 5.1 channel audio with WinTV v10?

Yes. When receiving digital TV with a surround sound (5.1) audio track, WinTV v10 sends the digital audio track to your PC's sound card for decoding and to drive your speakers.

But your PCs sound card needs to be able to handle the 5.1 channel audio. If your sound card does not have 5.1 channel audio capability, then the sound card will down mix the 5.1 audio into 2 channels.

I have a WinTV-HVR which has analog capability. How can I manually add channel 3 so I can get video from my cable box?

Here's how to manually add channel 3:

• click the 'gear' icon on the lower left of WinTV v10
• go to the 'Devices' tab
• select your device (example:WinTV-HVR-955Q)
• click 'Tuner setup'
• select 'Analog TV (cable/antenna)'
• under 'Channels' use the pull down menu and select 'Manual Entry'. Then click 'Next'
• in 'Number', type 3
• in 'Name' type 3 (or maybe something like 'Cable box'
• click 'Add'
• click 'Next' and 'Next'

Now you will have added analog channel 3 to your channel list. You can find the channel list by RIGHT clicking your mouse over the WinTV window and selecting 'Find channel'. You should see channel 3 listed.

Hauppauge Wintv-hvr 950 Drivers Update

Keyboard Control in WinTV

• Next Channel: Plus (+)
• Previous Channel: Minus (-)
• Last channel (the channel you were tuned to previously): Alt P
• Increase Audio Volume: 'Page Up'
• Decrease Audio Volume: 'Page Down'
• Mute: 'Ctrl + M'
• Enter Preset Number: '0 - 9'
• Show Channel List: 'Ctrl + L'
• Make Snapshot: 'Space Bar'
• Show Now/Next: 'Ctrl + O'
• Display Stream Details: 'Ctrl + D'
• Subtitles on / off: 'Ctrl + S'
• Change Aspect Ratio: 'Ctrl + A'
• Pause Live TV: 'Ctrl + Q'
• Continue Live TV: 'Ctrl + P'
• Record: 'Alt + R'
• Stop recording: 'Alt + S'
• Skip Ahead: 'Ctrl + F'
• Skip Back: 'Ctrl + R'
• Catch up to live TV: 'Ctrl + C'
• Full Screen / TV-in-a-window: 'Ctrl + W'
• Exit Full Screen: 'Esc'
• Start TV: 'Alt + T'
• Start Recording: 'Alt + R'
• Stop Recording / Playback: 'Alt + S'
• Open File menu for playback: 'Alt + F'
• Open the Task Menu: 'Alt M'
• Open WinTV Settings Dialog: 'Ctrl + I'
• Exit Application: 'Alt + F4'